I.Product introduction of refractory crosslink polyethylene pipe
Properties of aluminum plastic composite pipe
1.Pipe that shall be co-extruded from mould. In contrast to other techniques, it features excellent fluidity for hot-melt adhesive and higher adhesion strength with EVOH.
2.On line inspection for the increase of pressure: After pressure rises to 0.6-0.8 Mpa, EVOH tightly connects with plastic. Adhesion strength then has been improved.
3.Synchronization computer controller: In the whole production line adopts computer controlling, when production velocity changes, it only requires to input digits of production velocity, and other parameters by computer automatic controlled.
4.Optic inspection apparatus: Pipe wall quality and outer diameter for pipe controller. It features as higher temperature and pressure endurance, higher elasticity, lower creep resistance properties and without corrosion. Widely usage application: Cold and hot water cycling system, air conditional system, heating system.
Advantage:
1.Excellent lower temperature resistance, applicable temperature scope: -70℃~+95℃
2.Hardness and elasticity, higher inner pressure strength, (Nominal stress:1.25MPa, burst pressure>4MPa, while 20℃.
3.In conformity with potable water hygienic standard, the pipe contains non-toxic components, not being rotten and breeding bacteria, it can be provided with the conveyance of potable water, purified water.
4.Higher chemical corrosion resistance and environmental stress cracking i.e. more kinds of chemical liquid can be conveyed.
5.Unprecedented advantages of pipe are being non-corrosive and non-incrustation, compared with common metal pipe.
6.With higher heat insulation and preservation properties, compared with metal pipe .
7.Having smoothness both inner and outer walls, the pipe have featured its smallest flow resistance. Attaining 30% of flow rate compared with zinc-plated steel pipe.
2.Major technical indicators of aluminum plastic composite pipe
Density ≥0.94g/cm³
Longitudinal recovery ratiio ≤3%
Crosslinked level ≥65%
Ourter appearance Smoothness both inner and outer appearances, free of san pit,bubble,as well as other deformities, in addition, even color, pointed groove, surface indentation not being allowed.
Vicat softening poit 123°c
Tensile strength ≥17%
Elongation at break ≥350
-45°c 24h No cracking,no leakage
Heat conductivity 0.35-0.46W/m*k
Liner expansion conefficient 0.2 mm/m*k
II.Application range of aluminum plastic composite pipe
1.It applies in the heating appliances in the domestic living room, bedroom, public bathroom, swimming pool, kindergarten, bead house and also used as floor pipe for heating appliance for example: airport expressway and melting snow pipe for city building.
2.Higher temperature radiator, concentration heating system in the residential houses.
3.Cold and hot water application for buildings, pipeline portable water system.
4.Tubing in the domestic water heater system and all kinds of joint pipe.
5.Fluid conveyance pipe for chemical and oil industries.
6.Fluid conveyance pipe for beverage, wines and milk in food industry.
7.Refrigerating pipeline system and water treatment pipeline system.
8.Other pipes in the industrial use.
production
|
specification
|
Packing(m/cn)
|
CartonSiz(mm)
|
M3
|
Weight(kg)
|
PEX-b PIPELINE SYSTEM
|
φ16×1.8
|
200
|
720*250*720
|
0.130
|
16
|
φ16×2.0
|
200
|
720*250*720
|
0.130
|
16
|
φ20×1.9
|
200
|
825*250*825
|
0.170
|
24
|
φ20×2.0
|
200
|
825*250*825
|
0.170
|
24
|
φ20×2.3
|
200
|
825*250*825
|
0.170
|
24
|
φ25×2.3
|
100
|
825*250*825
|
0.170
|
17
|
φ32×2.9
|
100
|
|
|
|
φ32×3.6
|
100
|
|
|
|
|